Description
Technical Parameter
Model | TH8601 | TH8601A | ||
Test Pin | 128 Pin | 64 Pin | ||
Test Signal Source | Sine Signal Source:50Hz-300kHz, ProgrammableCapacitance Component Test 1Vrms | Frequency: 0.02% 1Vrms, Voltage 10% | ||
Programmable DC Signal Source:5Vdc MAX | 10% | |||
Programmable DC Current Source:1-20mA | 10% | |||
Programmable DC High Voltage Source:1mA Max | 5V-100V | 10%±1 digit | ||
100Vdc-1000Vdc | 5%±1 digit | |||
Programmable AC High Voltage Source:10mA Max | 50V-100Vac | 10%±1 digit | ||
100Vac-750Vac | 5%±1 digit | |||
Channel Plate on-off scanning Signal Source:5Vdc | ||||
Test Speed | Transient Open and Short Circuit (128 points) Sample Standard:10ms | Indicates the time of sweeping 64 NET O/S at a time | ||
Basic Value of Test Speed:100ms | Indicates the measurement time of single passive component or the total measurement time of one cable | |||
Capacitance Measurement | Range: 0.1pF-300pF(sample 10pFmin) | 10%±3 digit | ||
Range: 300pF-1000μF | 5%±3 digit | |||
Resistance Measurement | 10mohm-1Mohm | 5%±1 digit | ||
Cond./Interval cond. | 10mohm-50ohm | 5%±5 digit | ||
Open andShort Circuit | 1kohm-50kohm | 10%±1 digit | ||
Diode Testing | 0-10V | 10%±1 digit | ||
Insulation Resistance | 1Mohm-100Mohm | 5%±5 digit | ||
100Mohm-1000Mohm | 10%±5 digit | |||
DC Leakage Current | 1μA-1000μA | 5%±2 digit | ||
AC Leakage Current | 0.01mA-5mA | 10%±5 digit |