KEYSIGHT M9192A Digital Stimulus/Response Pattern Editor Software
The M9192A DSR Pattern Editor Software provides a development system GUI for M9195A/B PXIe DSR modules; error logs can be dropped into waveform editor, speeding up test debugging, showing discrepancies between ATE pattern state vs. the DUT.
NewRent
Close
KEYSIGHT M9193A Digital Stimulus/Response Pattern Editor with Data Conversion Software
The Keysight M9193A DSR Pattern Editor with Data Converters combines the digital pattern editor with numerous data converters to make interfacing to digital design software easier.
KEYSIGHT M9195B PXIe Digital Stimulus/Response with PPMU: 250 MHz, 16ch
M9195B PXIe Digital Stimulus/Response module offers flexible control of digital Input/Output or synchronized dynamic digital using 16 channels with programmable logic levels, deep memory, delay, per-channel parametric measurement units (PPMU).
NewRent
Close
KEYSIGHT Y1245A Single-site Digital Stimulus/Response Cable: 0.5m
Use the Y1245A single-site (16 channels) 0.5 meter signal cable to connect 16 digital channels, 16 PPMU sense channels, 4 high voltage channels, and 4 open drain/ground channels. This is an M9195A/B PXIe DSR accessory.
NewRent
Close
KEYSIGHT Y1246A Single-site Digital Stimulus/Response Cable: 1m
Use the Y1246A single-site (16 channels) 1 meter signal cable to connect 16 digital channels, 16 PPMU sense channels, 4 high voltage channels, and 4 open drain/ground channels. This is an M9195A/B PXIe DSR accessory.
NewRent
Close
KEYSIGHT Y1247A Single-site Digital Stimulus/Response Cable: 2m
Use the Y1247A single-site (16 channels) 2 meter signal cable to connect 16 digital channels, 16 PPMU sense channels, 4 high voltage channels, and 4 open drain/ground channels. This is an M9195A/B PXIe DSR accessory.
NewRent
Close
KEYSIGHT Y1248A Multi-site Digital Stimulus/Response Cable: 1m
Use the Y1248A multi-site (4 sites of 4 channels) 1 meter, signal cable to connect 16 channels divided into 4 independent partitions (connectors). This is an M9195A/B PXIe DSR accessory.
NewRent
Close
KEYSIGHT Y1249A Multi-site Digital Stimulus/Response Cable: 2m
Use the Y1249A multi-site (4 sites of 4 channels) 2 meter, signal cable to connect 16 channels divided into 4 independent partitions (connectors). This is an M9195A/B PXIe DSR accessory.
NewRent
Close
KEYSIGHT Y1250A Four module sync cable
The Y1250A is required when synchronizing multiple (up to four) M9195B PXIe DSR modules; only supported on the M9195B (not supported with the M9195A).
NewRent
Close
KEYSIGHT Y1251A Twelve module sync cable
The Y1251A is required when synchronizing multiple (up to twelve) M9195B PXIe DSR modules; only supported on the M9195B (not supported with the M9195A).
